Acrel Bm-Di/II Analog DC Signal Current Isolator with 2-20mA Two Way Output DIN Rail Current Isolator
Basic Info
Model NO. | BM-DI/II |
IP Rating | IP44 |
Certification | CE |
Customized | Non-Customized |
Power Supply | DC 24V |
Application Side | Industrial Application |
Warranty | 2 Years |
Input Signal | 4-20mA |
Output Signal | 2 Channels 2-20mA |
Transport Package | Paper Carton |
Specification | 0.5kgs |
Trademark | Acrel |
Origin | Jiangsu China |
HS Code | 8504311000 |
Production Capacity | 99999pieces/Year |
Product Description
The module isolates and converts single-circuit direct current or voltage input signals to mutually-independent two-circuit analogue outputs. It is suitable for the application where a transducer generates one signal circuit to programmer and the other signal circuit to an indicator on site. The module boasts a single input circuit. Therefore,the input voltage drop is almost constant,up to 3.5V and independent from loads.The maximum optocoupler isolation voltage can reach 2kV.
Technical parameters | Index | |
Input | Range | Direct current:4-20mA,0-20mA Direct voltage:DC0-75mV,0-5V,0-10V,0-300V |
Impedance | Variable,voltage drop up to3.5V | |
Overload | Current :100mA or 1W Voltage :50V at 0-10V | |
Output | Range | One circuit:DC 4-20mA;the other circuit:DC4-20mA or DC0-5V |
Load | Current:≤500Ω;voltage:≥1kΩ | |
Zero adjustment | 15% | |
Span adjustment | 15% | |
Power supply | Nominal value and range | DC 24V (alternatively DC18V-36V) |
Accuracy/linearity | Max.0.5%of full span | |
Temperature coefficient | ≤200ppm/ºC | |
Response time | ≤400ms | |
Isolation voltage | 2kV between input and each output and between power supply to output | |
Surrounding conditions | Temperature | Operating temperature:-10-+55ºC;storage temperature:-25-+70ºC |
Humidity | ≤95%RH,no condensation,place without corrosive gases | |
Height above sealevel | ≤2000m | |
Installation method | With guide rail TS35 |
Packaging & Shipping
Company Profile
Exhibition
Certifications
FAQ