IEC Approval 5g Tower Base 6 Circuit DC Smart Energy Power Meter for China Telecom Amc16-Dett

Basic Info

Model NO.	AMC16-DETT
Measured Signal	Continuous Wave
Type	Energy Meter
Certification	IEC
Customized	Non-Customized
DC Voltage	-48VDC
DC Current	6 Channel DC200A/5V
Grid Power Monitoring	1 Channel 0-5V DC
Communication	Modbus RTU RS485
Application	Base Station
Power Supply	-40~-60VDC
Warranty	2 Years
Default Baud Rate	9600BPS
Transport Package	Paper Cartpn
Specification	134*246mm
Trademark	ACREL
Origin	Jiangsu, China
HS Code	9030849000
Production Capacity	1000PCS/Week

Product Description

Product Description

IEC approval 5G tower base 6 circuit DC smart energy power meter AMC16-DETT

AMC16-DETT is designed special for China tower metering,ACREL 6 circuit dc power meter is for China Telecom, China Mobile, China Unicom,and other telecommunication tower metering.
Base station dedicated DC energy meter AMC16-DETT is specially designed for base stations where have sharing requirements, and switch power supply is without the function of sub-user metering.

The meter could measure 6 circuits DC energy, and supply working current to the matched hall sensors. Meanwhile, it can realize zero drift calibration by upper computer software. have the functions of telemetering,teleindication,teleadjusting, metering at real time, energy quality abnormal alarm, data storage and processing, data interaction.

This meter can measure DC power consumption of three operators, providing detail data for base station.

Functions and Parameters

Functions of AMC16-DETT dc energy power meter

*DC rated voltage:1 circuit -48VDC

*DC current :6 channel hall current sensor,total DC200A/5V,China Telecom, China Mobile, China Unicom and the 1st channel reserve 50A/5V, 2nd channel reserve 100A/5V.

*Communication: RS485,default baud rate:9600bps

*Main functions:Monitoring equipment system time, total voltage,output current, power and energy, each circuit voltage, current,power and energy,LED display

*Alarm function:DC low voltage output alarm,DC high voltage output alarm,one power down alarm, module voltage loss alarm, metering branch error alarm, internal program error alarm, clock error alarm, memory failure alarm and AC input power failure alarm

*Timing function:support broadcast timing, could remote timing to the meter by RS485*Lightening protection(SPD module)

*Clamps power supply:Power supply output:+12V/100Ma, -12V/50mA

*Power supply for the meter:-40~-60VDC

Input	DC voltage	1 channel: -48VDC
	DC current	6 channel hall current sensor,total DC200A/5V,China Telecom, China Mobile, China Unicom and the 1st channel reserve 50A/5V, 2nd channel reserve 100A/5V.
	Grid power monitoring	1 channel: 0-5VDC
	Overload capacity	Voltage:1.2times continued,2 times continued 1s; Current: 1.2 times continued,10 times continued 1s.
Accuracy (superposition hall sensors)		1%In≤I≤10%In error±2.5%; I>10%In error±2%
resolution		Voltage output accuracy 0.01V; current output accuracy 0.01A; power output accuracy 0.01kw; energy output accuracy 0.01kwh
Functions	Basic function	Monitor device system time, total voltage, output total current, power, energy, each channel voltage, current, power, energy; LED indicator display;485 communication
	Metering function	Start current: under rated voltage, when the load current value of the meter doesn't exceed 1% of the max. current, the meter starts. Shunt running current: when there is no current in the current circuit of the meter, and 85%-125%of the rated voltage is applied on the voltage circuit, the calculator shall not have more than
	Alarm function	DC low voltage output alarm,DC high voltage output alarm,one power down alarm, module voltage loss alarm, metering branch error alarm, internal program error alarm, clock error alarm, memory failure alarm and AC input power failure alarm
	Timing function	support broadcast timing, could remote timing to the meter by RS485
	Hall CT power supply	:Power supply output:+12V/100Ma, -12V/50mA
	Clock accuracy	≤0.5s/d(23ºC),≤1s/d(-20ºC~60ºC)
Powe supply for ther meter		-40VDC~ -60VDC
Power consumption		≤2W

Dimensions and Wirings

ACREL recommended Hall CTs (Unit:mm) AHKC-EKA,AHKC-EKB or AHKC-K

About ACREL

Professional manufacturer with over 18 years experience in energy meters

FAQ

Q:Where is your company located?
A:Our headquarter is in Shanghai, our factory locates in Jiangyin,Jiangsu Province,China.It takes about 1 hour by car from Shanghai Hongqiao International Airport to our factory. As it is low labor cost here in Jiangsu,we can offer a better price with high quality. A:Our headquarter is in Shanghai, our factory locates in Jiangyin,Jiangsu Province,China.It takes about 1 hour by car from Shanghai Hongqiao International Airport to our factory. As it is low labor cost here in Jiangsu,we can offer a better price with high quality.
Q:What's your lead time?
A:Sample time 1-3days,mass production 10~20days for order more than 500pcs Q:Payment terms?
A:Usually,TT,credit card,western union,in cash and so on.You can also choose to pay 30% as deposit and the balance before shipment or against copy of B/L if the order is large.
Q:Can other logo be put on your products(ODM)?
A:Yes,but MOQ for ODM will be at least 5pcs.We also need you provide logo Ai Format or EPS.